Newcon-optik DN482 Instrukcja Użytkownika

13. ACCEPTANCE CERTIFICATE Image Intensifier Tube Minimum Measured Resolution, lines/mm 30 Photocathode sensitivity, integral, µA/ lm 400 L

Front and rear feet (2, 3) with thwart screws (6) are the standard feet for Standard prisms (4), manufactured by the companies that produce mounts (fo

IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this man

10. TROUBLESHOOTING ] The scope does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are

CAREFULLY READ THE INSTRUCTIONS BEFORE USE! MISUSE WILL VOID THE WARRANTY. 1. BRIEF DESCRIPTION DN482/483 Night Vision Scope is a modern, universa

• Remove the rubber eyepiece guard from the scope. • Set the eyepiece in the medium position. • Screw the adapter ring with the camera in an internal

VIDEO3. TECHNICAL CHARACTERISTICS General Magnification, x 3.7 6.1 Field of view, degree 10 8 Objective lens Focus length, mm 100 165

7. ADJUSTMENT OF THE SCOPE ON THE RIFLE Type and dimensions of the reticle The type and dimensions are represented on the drawing. The brightness o

recommended to use Alkaline batteries, which ensure the most stable performance. b. Testing of operation in a daytime During the bright time of the

(Newcon Optik supplies all parts of the alignment). Installation of the device is performed as follows: • Check the elevation of the fastening